 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION TVS 1.5KE SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 5.0 WATTS STEADY STATE FEATURES * * * * * * Plastic package has underwriters laboratory certificate Glass passivated chip construction 1500 watt surage capability at 1ms Excellent clamping capability Low zener impedance Fast response time 1.5KE 1.0 (25.4) MIN. .042 (1.07) DIA. .038 (0.96) .375 (9.5) .285 (7.2) Ratings at 25 o C ambient temperature unless otherwise specified. .210 (5.3) .190 (4.8) 1.0 (25.4) MIN. DIA. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load, For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA suffix for types 1.5KE 6.8 thru 1.5KE 450 Electrical characteristics apply in both direction MAXIMUM RATINGS (At TA = 25 C unless otherwise noted) RATINGS Peak Power Dissipation at TA = 25 oC, TP = 1mS ( Note 1 ) Steady State Power Dissipation at TL = 75 oC lead lengths, .375" ( 9.5 mm ) ( Note 2 ) Peak Forward Surge Current, 8.3ms single half sine wavesuperimposed on rated load( JEDEC METHOD ) unidirectional only Maximum Instantaneous Forward Current at 50.0A for unidirectional only ( Note 3 ) Operating and Storage Temperature Range o o SYMBOL PPPM PM(AV) VALUE Minimum 1500 5.0 UNITS Watts Watts IFSM 200 Amps VF TJ, TSTG 3.5/5.0 -55 to + 150 Volts 0 C 2002-12 NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25 C per Fig.2. 2. Mounted on copper pad area of 0.8X0.8" ( 20X20mm ) per Fig.5. 3. VF = 3.5V for devices of V(BR) < 200V and VF = 5.0 Volts max.for devices of V(BR) > 200V. RATING AND CHARACTERISTIC CURVES ( 1.5KE6.8 THRU 1.5KE450CA ) FIG. 1 - PULSE POWER RATING CURVE PPPM, PEAK PULSE POWER, KW FIG. 2 - PULSE DERATING CURVE PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE,% 100 Non-Repetitive Pulse Waveform Shown in Fig.3 TA = 25 100 75 10 50 1.0 25 0.1 0.1uS 0 0 25 75 100 125 150 175 200 50 TA, AMBIENT TEMPERATURE,( ) 1.0uS 10uS 100uS 1.0mS TP, PULSE WIDTH, sec FIG. 3 - PULSE WAVEFORM 10mS FIG. 4 - TYPICAL JUNCTION CAPACITANCE 10000 Unidirectional----Bidirectional 150 IPPM, PEAK PULSE CURRENT,% tr = 10usec. Peak Value IPPM Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of IPPM CJ, CAPACITANCE, pF VR = 0 100 IPPM 2 10/1000usec. Waveform as Defined by R.E.A. HALF VALUE - 1000 50 100 f = 1MH Vsig = 50mVp-p TJ = 25 VR = RATED STAND-OFF VOLTAGE 0 0 1.0 2.0 t, TIME,mS 3.0 4.0 10 5 10 100 500 V(BR), BREAKDOWN VOLTACE, VOLTS FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL AMPERES PEAK FORWARD SURGE CURRENT FIG. 5 - STEADY STATE POWER DERATING CURVE PM(AV), STEADY STATE POWER DISSIATION, WATTS 1.00 200 L = 0.375"(9.5mm) Lead Lengths 60Hz Resistive or Inductive Load 8.3ms Single Half Sine-Wave (JEDED Method) TJ = TJ max. 0.75 40 20 10 0.50 0.8X0.8X0.040" (20X20X1mm) Copper Heat Sinks 0.25 0 0 25 50 75 100 125 150 175 200 TL, LEAD TEMPERATURE ( ) 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 RECTRON RATING AND CHARACTERISTIC CURVES ( 1.5KE6.8 THRU 1.5KE450CA ) DVC, INCREMENTAL CLAMPING VOLTAGE DVC, INCREMENTAL CLAMPING VOLTAGE FIG. 7 - INCREMENTAL CLAMPING VOLTAGE CURVE UNIDIRECTIONAL 100 Waveform 8X20 Impulse DVc = Vc-V(BR) 1.5KE200 1.5KE130 1.5KE100 1.5KE75 FIG. 7 - INCREMENTAL CLAMPING VOLTAGE CURVE UNIDIRECTIONAL 100 Waveform 10X1000 Impulse DVc = Vc-V(BR) 1.5KE200 1.5KE130 20 10 20 10 1.5KE75 1.5KE39 2.0 1.0 1.5KE39 1.5KE33 1.5KE6.8 1.5KE9.1 1.5KE18 1.5KE12 2.0 1.0 1.5KE33 1.5KE6.8 1.5KE9.1 0.2 0.1 0.5 1 2.0 10 20 IPP, PEAK PULSE CURRENT, AMPS 50 0.2 0.1 0.5 1 2.0 10 20 IPP, PEAK PULSE CURRENT, AMPS 50 DVC, INCREMENTAL CLAMPING VOLTAGE 100 Waveform 8X20 Impulse DVc = Vc-V(BR) 1.5KE200C DVC, INCREMENTAL CLAMPING VOLTAGE FIG. 9 - INCREMENTAL CLAMPING VOLTAGE CURVE UNIDIRECTIONAL FIG. 7 - INCREMENTAL CLAMPING VOLTAGE CURVE UNIDIRECTIONAL 100 Waveform 10X1000 Impulse DVc = Vc-V(BR) 1.5KE200C 20 10 20 10 1.5KE75C 1.5KE39C 1.5KE75C 1.5KE30C 2.0 1.0 1.5KE39C 1.5KE30C 1.5KE15C 1.5KE11C 1.5KE7.5C 2.0 1.0 1.5KE15C 1.5KE11C 1.5KE7.5C 0.2 0.1 0.5 1 2.0 10 20 IPP, PEAK PULSE CURRENT, AMPS 50 0.2 0.1 0.5 1 2.0 10 20 IPP, PEAK PULSE CURRENT, AMPS FIG. 12 - BREAKDOWN VOLTAGE TEMPEATURE COEFFICIENT CURVE 50 KV-TEMPERATURE COEFFICIENT-mV/ 100 FIG. 11 -INSTANTANEOUS FORWARD VOLTAGE CHARACTERISTICS CURVE 1000 FORWARD CURRENT 10 Pulse Width = 300uS 1% Duty Cycle TJ = 25 100 Unidirectional Bidirectional 1 10 0.1 0 0.4 0.8 1.2 1.6 2.0 INSTANTANEOUS FORWARD CURRENT, AMPERES 1 5 10 20 50 200 100 500 V(BR), BREAKDOWN VOLTAGE, VOLTS RECTRON TRANSIENT VOLTAGE SUPPRESSORS 1500W SERIES TVS DIODES / 1.5KE ( CASE 10 ) 1500W Breakdown Voltage TYPE VBR (Volts) MIN. 1.5KE6.8 1.5KE6.8A 1.5KE7.5 1.5KE7.5A 1.5KE8.2 1.5KE8.2A 1.5KE9.1 1.5KE9.1A 1.5KE10 1.5KE10A 1.5KE11 1.5KE11A 1.5KE12 1.5KE12A 1.5KE13 1.5KE13A 1.5KE15 1.5KE15A 1.5KE16 1.5KE16A 1.5KE18 1.5KE18A 1.5KE20 1.5KE20A 1.5KE22 1.5KE22A 1.5KE24 1.5KE24A 1.5KE27 1.5KE27A 1.5KE30 1.5KE30A 1.5KE33 1.5KE33A 1.5KE36 1.5KE36A 1.5KE39 1.5KE39A 1.5KE43 1.5KE43A 1.5KE47 1.5KE47A 1.5KE51 1.5KE51A 1.5KE56 1.5KE56A 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 MAX. 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 @IT (mA) 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Reverse Stand off Voltage VWM (Volts) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 Maximum Reverse Leakage at VWM ID(uA) 1000 1000 500 500 200 200 50 50 10 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Maximum Peak Pulse Current IPPM (Amps) 139 143 128 133 120 124 109 112 100 103 92.6 96.2 86.7 89.8 78.9 82.4 68.2 70.8 63.8 66.7 56.6 59.5 51.5 54.2 47 49 43.2 45.2 38.4 40 34.5 36.2 31.4 32.8 28.8 30.1 26.6 27.8 24.2 25.3 22.1 23.1 20.4 21.4 18.6 19.5 Maximum Clamping Voltage at IPPM VC (Volts) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 RECTRON TRANSIENT VOLTAGE SUPPRESSORS 1500W SERIES TVS DIODES / 1.5KE ( CASE 10 ) 1500W Breakdown Voltage VBR @IT (Volts) MIN. 1.5KE62 1.5KE62A 1.5KE68 1.5KE68A 1.5KE75 1.5KE75A 1.5KE82 1.5KE82A 1.5KE91 1.5KE91A 1.5KE100 1.5KE100A 1.5KE110 1.5KE110A 1.5KE120 1.5KE120A 1.5KE130 1.5KE130A 1.5KE150 1.5KE150A 1.5KE160 1.5KE160A 1.5KE170 1.5KE170A 1.5KE180 1.5KE180A 1.5KE200 1.5KE200A 1.5KE220 1.5KE220A 1.5KE250 1.5KE250A 1.5KE300 1.5KE300A 1.5KE350 1.5KE350A 1.5KE400 1.5KE400A 1.5KE440 1.5KE440A 1.5KE450 1.5KE450A 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 99.0 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 198 209 225 237 270 285 315 333 360 380 396 418 405 427.5 TYPE MAX. 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 242 231 275 263 330 315 385 368 440 420 484 462 495 472.5 (mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Reverse Stand off Voltage VWM (Volts) 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 364 385 Maximum Reverse Leakage at VWM ID(uA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Maximum Peak Pulse Current IPPM (Amps) 16.9 17.6 15.3 16.3 13.9 14.6 12.7 13.3 11.5 12.0 10.4 10.9 9.5 9.9 8.7 9.1 8.0 8.4 7.0 7.2 6.5 6.8 6.1 6.4 5.8 6.1 5.2 5.5 4.4 4.6 4.2 4.4 3.5 3.6 3.0 3.1 2.6 2.7 2.4 2.5 2.2 2.3 Maximum Clamping Voltage at IPPM VC (Volts) 89.0 85.0 98.0 92.0 109 104 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 682 652 Notes : 1. VBR measured after IT applied for 300ms. IT = square pulse or equivalent. 2. For bidirectional use C or CA suffixs for all types (ex. 1.5KE6.8C, 1.5KE450CA) electrical characteristics apply in both directions. 3. For bidirectional types having VWM of 10 volts and less, the ID Iimit is doubled. 4. All devices UL listed file# E211196. RECTRON |
Price & Availability of 15KE450
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |